Disclaimer

All opinions are my own.
Showing posts with label # Physical Properties. Show all posts
Showing posts with label # Physical Properties. Show all posts

Sunday, November 8, 2026

Benadryl Manufacturing Process Simplification and Use of Triumvirate (1) [Unit processes, Sociochemicology and Unit operations]

For every chemical process development and commercialization, the following age old routine that has been used from the lab to the plant floor. Briefly the process starts from the paper chemistry to laboratory confirmation, some optimization to pilot plant and final commercialization. These are sequential events and have been successfully used for most chemicals and their processes. They have been practiced and mastered from the day we consider bulk production of chemicals. They have become routine. However, they need continuous refreshing for improvement and simplification. 

 

Inclusion of the Village (1) along with incorporating elements of Triumvirate (2) from inception can significantly impact the development and commercialization process. These, in my estimation, are included randomly but not in a regimented way in the development of chemistries and processes. Regimented inclusion along with our imagination and creativity can, if practiced routinely, can simplify processes and reduce use of solvents and excess amount of chemicals i.e. costs are reduced and environmental impact will be minimized. Several such chemistries have been discussed (3,4,5,6). In my experiences inclusion of Triumvirate always leads to significant simplification of processes for life extending and life facilitating chemicals. Once we incorporate such practices, they become addictive.  

 

Synthesis of Benadryl:

 

Different chemistries (too many to cite) have been proposed for the manufacture of diphenhydramine hydrochloride (Benadryl). Laboratory process (7) was selected for its simplicity. Its review suggests that elements of triumvirate (2) and knowledge of village (2)can be used to further simplify commercialization of a continuous process (8) and totally eliminate/minimize solvent use (Figure 1). This would be quite a deviation from the suggested laboratory process (7). Possibilities are reviewed. 

 

Authors (7) call for reacting benzhydrol with hydrochloric acid to produce chlorodiphenylmethane which is then reacted with dimethylethanolamine to produce diphenhydramine hydrochloride (Benadryl) Figure 1. Since the isolation of benadryl is not discussed in the paper (7) it is expected it would be separated processed as a solid. 

 

Using process chemistry (7), Figure 1, and capitalizing on physical and chemical properties of each raw material, intermediates and the final product, Table 1, one can easily postulate, test and commercialize a simplified continuous process, Figure 2 and is discussed.

 

 

Figure 1: Benadryl Process Chemistry (7)


Physical properties (Table 1) suggest that all of the chemicals except, for the final product benadryl, are liquid above melting point of benzhydrol. By carrying the reaction above 70 °C need for any organic solvent can be eliminated. Liquid Benzhydrol can be metered and the reaction stoichiometry controlled using off the shelf commercial process controllers. Nothing new has to be invented. We can eliminate solvent use. In addition, choosing higher reaction temperature accelerates the reaction rate, reduces the reactor size i.e. investment: an excellent opportunity. 

 

Based on my experiences (3,4,5,6) excess of reactants can be minimized. This practice has been routinely used in many reactions (3,4,5) for the manufacture of many chemicals that improve life style and extend life. 



Chemical

Benzhydrol

Hydrochloric acid

Chlorodiphenylmethane

Dimethylethanolamine

Diphenhydramine

Formula

(C6H5)2CHOH

HCl

(C6H5)2CHCl

C4H11NO

C17H21NO

MW

184

36.5

202

89

256

CAS No.

91-01-0

7647-01-0

90-99-3

108-01-0

58-73-1

MP °C

65-69

 

15-20

-59

166-170

BP °C

297

 

270

134

 

Table 1: Physical Properties


Diphenhydramine hydrochloride (benadryl) being a solid at the room temperature provides an excellent opportunity to produce the solid product using well-known commercially available methods such as crystallization or wiped film evaporators.  

 

Based on my experiences (3,4,5) Figure 2 is my rendition of a simplified process flow diagram. Every chemical engineer and/or chemist will totally understand the process schematic and the associated equipment. 

 

Plate and frame heat exchanger (9) or electric heaters (10) instead of traditional jacketed reactors can used as a reactor. Since electric heaters do not require heating fluid the process economics improves significantly. Suggested alternate reactors have value and every experienced chemical engineer and chemist, business manager, manufacturing manager will agree and understand. 


                          

Figure 2: Simplified block diagram for Benadryl production


Based on physical properties molten benzhydrol and hydrochloric acid will be metered in a properly designed plate and frame heat exchanger (9) or electric reactor (10) where the residence time and temperature will be controlled. Using process controls stoichiometry and operating temperature etc. processing conditions will be controlled. 

 

Dimethylethanolamine, a liquid, will be metered to produce diphenhydramine hydrochloride. Since diphenhydramine hydrochloride (benadryl) is a solid at room temperature it will be processed as a solid using well known commercial methods such as crystallizer or a wiped film evaporator. 

 

Methods, equipment and technologies have been commercial for over 70+ years will be used to control the process. 

 

Perspective presented is based on my experience and village. It will have to be reviewed and tested in the laboratory to make sure that the elements of the triumvirate (2) as suggested can be exploited to create and commercialize an excellent ecofriendly simple with no/minimal impact. Every experienced chemist/chemical engineer will understand. It is possible that they might make additional improvements to create a simpler process. 


Every process chemistry has its own creation story. How we use our creativity and imagination is our story.

 

Girish Malhotra, PE


EPCOT International


1.     Malhotra, Girish: Chemical Process Simplification: Improving Productivity and Sustainability   John Wiley & Sons, February 2011

2.     Malhotra, Girish: The Process Development Triumvirate: Profitability Through Simplicity

3.     Malhotra, Girish: Active Pharmaceutical Ingredient Manufacturing: Nondestructive Creation De Gruyter April 2022

4.     Malhotra, Girish: Chapter 4 “Simplified Process Development and Commercialization” in “ Quality by Design-Putting Theory into Practice” co-published by Parenteral Drug Association and DHI Publishing© February 2011

5.     Malhotra, Girish: The Process Development Triumvirate: Profitability Through Simplicity, Profitability through Simplicity  

6.     Malhotra, Girish: Sociochemicology; Its birth and Value, Profitability through simplicity

7.     Konkol et.al. On the synthesis of diphenhydramine: Steady state kinetics, solvation effects, and in-situ Raman and benchtop NMR as PAT https://doi.org/10.1016/j.cej.2024.152159

8.     Continuous Process

9.     Alfa Laval: Gasketed plate-and-frame heat exchangers

10.  Process Technology Frontier Inline Heater

Monday, June 29, 2026

Sociochemicology: Its Birth and Value

Sociochemicology (1) is THINK DIFFERENT (2) phrase in the chemical world. Since most are not be familiar with the term and its evolution, it has its own journey. It is my journey also. It is practical inclusion of characteristics and behavior of chemicals in process design. It is not peer reviewed as there is no set charter, course or class room curriculum. Nothing new has been discovered. It is just based on how the chemicals behave with each other under the process conditions. We learn and use them to create excellent manufacturing processes. 

 

My Journey:

 

Unknown to me my SOCIOCHEMICOLOGY (1,3) journey started in eighth grade chemistry class. The fact that different color gases evolve when acids react with metals intrigued and fascinated me/us. I needed to see this. I coaxed fellow students to join in my project. Since we did not have glassware, we used concrete steps of the house as the test tube. We collected different acids and metal pieces and poured acids on different metals/coins to see the colors of gases produced and smelled their pungency. Experiments were a great success but were reprimanded for pitting the concrete. This w as my first experience with chemicals showing their behavior. 

 

I entered our college organic chemistry laboratory Fall of 1959 and for the first time saw lab benches with stands, round bottom flasks, magnetic and propeller agitators, condensers and beakers etc. Euphoria sank in that we are going to be experimenting with chemicals that we have been studying in the chemistry classes. Our professor gave us a tour of what is what. The fume hood and the Bunsen burners: how to lite them ON and turn them OFF etc.. It was exhilarating. Safety tips, handling of chemicals and the glassware suggested that we are going to be scientists and engineers. 

 

Our teacher’s first instruction was NEVER add water to the acid but do it the other way i.e. slowly add acid to water. Explanation was that when strong acid is added to water with inadequate mixing it generates heat and contents can boil over causing injury. Acid should be added slowly to water to absorb the heat of solution. Heat will dissipate in the water and will not boil over and cause a chemical accident by erupting water. It made sense. This was our first lesson about how the physical and chemical properties of chemicals influence and interact with each other chemical but did not fully understand this value till an incident happened in our lab. 

 

One of the fellow student must have not heard our professor or paid attention. He did exactly the opposite of what the professor had told us not to do and added water to concentrated sulfuric acid. The mix boiled out of the test tube and flew like a rocket to the ceiling and splashed over many students. Commotion set in and the lab emptied out in a hurry. No one was hurt but few days later our clothes had holes. Lesson learnt was respect chemicals, use them wisely and they can be our friend. 

 

During my sophomore chemical engineering year, our organic chemistry lab our professor gave me the responsibility to manage the laboratory, chemicals, reagents and the lab supplies. In return, I was given permission to experiment and test different synthesis routes for dyes and chemicals from our organic chemistry book. This allowed me to test reactions listed in the book and beyond as long as they were safe. This freedom allowed me to learn more than what was part of the curriculum. Unknown to me seeds of “Think Different (2)” were planted/reinforced/strengthened/bolstered. These experiments helped me later in my career.  

 

For the last 60+ years, I have been involved in various roles in petrochemicals, fine/specialty chemicals, coatings, flavors and fragrances and other chemical industries. Roles have included reviewing chemistries, process development and design, commercialization, manufacturing, patent reviews and consulting clients at many different companies to simplify their manufacturing practices etc. This has been a continuous process. All along my career I had realized that each chemical has its unique and different behavior for each other and how we use them in our processes. 

 

With time I learnt that we can manage and manipulate physical properties to simplify processing conditions by manipulating their physical state, how and where we add these reactants to the process. This facilitated and simplified our processes. This was/is similar to social manipulation of behavior of chemicals like human behavior to create friendships and relationships, Sociology (4). So in 2013 I appropriately coined mutual behavior of chemical relationships as “SOCIOCHEMICOLOGY (1). Its use has grown from benchtop experiences, experiments and application of components of triumvirate (3,5) to critical elements of actual commercial processes. Due to lab equipment limitations, behavior and benefits of many chemicals cannot be easily tested and/or measured easily in laboratory. However, using chemical engineering design principles, behavior of chemicals can be used in process designs and processes simplified. Without their incorporation most commercialized processes are larger version of the round bottom flask experience. 

 

We used elements of sociochemicology profusely for every batch (6) and continuous processes (7). Their inclusion allowed us to simplify processes. Some of the unit processes (8) were e.g. continuous/batch diazotization, sulfation, sulfonation, amidation, chlorination, nitration and alkylation. In addition, our processes included batch and continuous unit operations (9) e.g. decantation, filtration, crystallization and spray drying to name a few. 

 

Sociochemicology (1) delivers simplicity: an ultimate sophistication and a creator‑centric philosophy.

 

Sociochemicology’s Path and Considerations:

 

We have to recognize that the process chemistry shows us the feasibility of the reaction path and process. What generally works in the lab has to be modified and fitted in the existing equipment or new equipment has to designed for the process. Final commercialized process has to be safe and economical. 

We are taught, know and have all the tools to create excellent processes but still are stuck in 80+ years old “round bottom flask” mode especially in pharmaceuticals. Why? Simple answer. We are willing to pay for inefficient processes and in the process do not care how we leave the Earth when we leave i.e. highest emissions. This is especially true for pharmaceuticals (10). It is up to us to challenge ourselves. If we do not, we will be stuck in the tradition of bull going around in circles(11). Food and Drug Administration (FDA)(12) also has to change its ways if it/we want manufacturing technology innovation in pharmaceuticals. If a DARK HORSE using methods shared (13, 14,15,16, 17) can show how to change the landscape, there can be a domino effect. 

 

The following needs to be considered for commercial processes and the village has to be an integral part (13,14,15,16, 17). There are other ways. There is not enough space to enumerate every option. Product volume plays a significant role in process selection, equipment sizing and use. Traditions of using what equipment is available in-house and from the vendors has to be evaluated, not an easy choice. Equipment vendors will challenge options. In addition, we have to always scout equipment that is used in other industries/applications and can be used in the chemical manufacturing. There will be considerable resistance from within the companies as well as users. These can be overcome through higher profits and better product quality.

 

We have to be always mindful in our process development/design of the fundamental fact is that every reaction happens in liquid phase. Thus, our intention has to be how to create all liquid phase. Village (13,14,15,16, 17) offers its input and expertise. Some of the considerations are enumerated. Creativity and imagination is necessary.

 

1.     Solid raw materials as a melt offer opportunities to control process stoichiometry and can reduce solvent need. Fluid flow and process temperatures can be controlled. Excess solvents facilitate the process but can become unnecessary as they occupy reactor equipment space, a prime real estate. Heat of the molten liquids speed the reaction rate.

2.     Can the solid raw material instead of dissolving in solvent can be educted in the process thereby minimizing additional solvent? This cannot be tested in the lab. 

3.     Gas can be used as liquid not only it can reduce solvent use but also can facilitate reaction rate. Gas, if added as liquid, can be used to control the reaction temperature and heat of exotherm as the liquid converts to gas. We exploited physical and chemical properties to our advantage. 

4.     Exotherms of the reactions cannot be exploited in the laboratory to facilitate and speed the reactions. Labs generally do not have the equipment or the set up to test. Ingenuity like raising the laboratory process reaction temperature comes in handy. In actual production set up using proper unit process (8) and unit operation (9), exotherms can be exploited in many ways leading to reduced solvent use, equipment size and investment. 

5.     Mutual solubilities or their lack of cannot be exploited in the lab development set up. They can be tested. However, they can be used in a commercial process to facilitate the process. There are creative ways to exploit.  

 

Unknown to our equipment vendors we used plate and frame heat exchangers (now called micro or flow reactors) and crystallizers differently. Other equipment was also used differently than the suggested use. Each company has to decide how it can capitalize on mutual behavior of chemicals i.e. sociochemicology of the reactants to have an optimum process. Overall economics has to be evaluated.  

 

We all know that without flow of liquids, centuries old practice, no reaction takes place. Since flow of fluids in lab equipment is not directly translatable to commercial equipment, what does “Flow Chemistry” really mean and what is its value. Similarly “Micro-reactors” are a fancy name for plate and frame heat exchangers that have been around and used since mid-fifties. Their use in lab development processes is not directly translatable to commercial processes. Each application and inclusion in a commercial process has to be justified. Thus suggesting “flow chemistry and micro-reactors” are new process advances in chemical and pharmaceutical manufacturing is like dressing an old house with a new coat of paint and calling it a new house, a misconception. 

 

Rational for giving new names to the traditional methods and equipment is not clear. In addition, especially micro reactors are expensive and may not fit every process. Each need has to be justified. Some of the existing commercial equipment can be used to accomplish the same objective and simplify the processes. Scale up of round bottom glassware (laboratory) to a commercial vessel (manufacturing) is not directly translational. 

 

Incorporation of the above is very possible in fine/specialty chemicals that enhance life style but not in API as the equipment/process. This is due to regulatory stranglehold and/or our inaptitude. We can practice creative designs but since the process has to be re-validated by FDA (12) after initial approval, a time consuming and expensive process each company has to share its intellectual property. No company wants to invest in better methods. Current regulatory approval methods have to change to allow incorporation of innovative processes (13). Simpler method would be that companies be allowed to proceed as long as they make sure that the product quality and performance is not compromised from the established specs. This would bring much needed manufacturing technology innovation to pharmaceuticals.

 

Process improvements and enhancements that come from inclusion of sociochemicology practices is difficult to test in the laboratory equipment. They are designed in commercial processes and are based on application of mutual social behavior of chemicals and used equipment. In addition any sociochemicology based designs being proprietary would not be published. 

 

Since FDA and other regulators are not familiar with many of the nuances of sociochemicology and if they insist on scrutinizing new and innovative methods before a drug manufacturing can be approved, no one will include and/or simplify their manufacturing processes as is the case now. From experience we included sociochemicology based designs. 


Due to limitations of the laboratory equipment, it is not easy to test mutual social behavior of the chemicals. Test of behaviors of chemicals can be a challenge but are doable if the experiments are properly designed. Creativity, imagination and knowledge of mutual behavior of the chemicals has to be included in design of such experiments. Stoichiometry i.e. the product cost and quality will be optimum. Process designed using the generated information will meet and/or exceed FDA stipulated product specifications. This would be a stark change from the current practices and the most difficult to accept and implement at the companies and FDA (12). If we want innovation in chemical/pharmaceutical manufacturing we have to be an outlier and THINK DIFFERENT (2). FDA’s methods have to change (18), a hard thing to implement and accept. 

Again to re-emphasize commercial process is judicious inclusion of the Triumvirate (3): unit processes (8), sociochemicology and unit operations (9). The THREE DOTS (19) have to be connected. So let us STAY HUNGRY and STAY FOOLISH (19) and “THINK DIFFERENT (2)” thereby creating excellent manufacturing processes that are green and economical. It is best if all of the above comes internally from each company as they define and select its own pathway. 

Incorporation of TRIUMVIRATE (5) in pharmaceutical manufacturing will result in manufacturing technology innovation, significantly reduce emissions per kilo of product and that will be a game changer.  

 

Girish Malhotra, PE

 

EPCOT International

 

References:

 

1.     Malhotra, Girish: Sociochemicology

2.     Apple Think Different

3.     Malhotra, Girish: Sociochemicology: Redefining Chemical Process Design for Efficiency and Sustainability, Profitability through Simplicity

4.     Sociology

5.     Malhotra, Girish: The Process Development Triumvirate: Profitability Through Simplicity, Profitability through Simplicity

6.     Batch Process   

7.     Continuous Process

8.     Shreve, R. Norris: Unit Process in Chemical Engineering, Ind. Eng. Chem. 1954, 46,4,672

9.     Unit Operation

10.  Sheldon R.A. The E factor 25 years on: the rise of green chemistry and sustainability, Green Chemistry   

11.  Bull going around in circles  

12.  FDA

13.  Malhotra, Girish: Profitability through Simplicity

14.  Malhotra, Girish: Chemical Process Simplification: Improving Productivity and Sustainability   John Wiley & Sons, February 2011

15.  Chapter 4 “Simplified Process Development and Commercialization” in “ Quality by Design-Putting Theory into Practice” co-published by  Parenteral Drug Association and DHI Publishing© February 2011

16.  Malhotra, Girish: Report: Strategies for Improving Batch or Creating Continuous Active Pharmaceutical Ingredient (API) Manufacturing Processes, March 2017

17.  Malhotra, Girish: Active Pharmaceutical Ingredient Manufacturing: Nondestructive Creation De Gruyter April 2022

18.  Malhotra, Girish: For Domestic Pharma Manufacturing: Reorganize CDER, Profitability through Simplicity

19.  Steve Jobs Stanford Commencement Address 2005